Automated Facility Systems, Inc

 

Home » All Products   12 zone wireless panel Details  12 zone wireless security panel for an easy self install. General Specifications ELECTRICAL Primary Operating Voltage: 120 VAC, 60 Hz Transformer: UL listed, Class II, plug-in, 16 VAC, 1.25 A (supplied) Back-Up Battery: 1.2 Amp-hour, 12 VDC RADIO RECEIVER Type: Superheterodyne Operating Frequency 315 MHz ± 100 Kc Sensitivity: -100 dB minimum Antenna Type: Counterpoised bipolar design Compatible RF Formats: Linear DX, DXS CONTROL PANEL Radio Zones: 12 supervised PAC Codes: Eight total, including Duress, Installer, five User and Page Alert Operating Modes: Off, Chime, Home, Home Instant, Away, and Test Sensor Types: 11 including Automation, Emergency, Panic, Fire, Perimeter, Exit/Entry, Interior Chime Only, Arm/Disarm A, Arm/Disarm B, and Environmental Auxiliary Outputs: Automation, External Console Speaker, and External Alarm Siren Memory: EEPROM retains system programming during total power failure Operating Temperature: 32° to 120° F (0° to 49° C) COMMUNICATOR Dialing: DTMF or pulse dialing; pulse speed (10 PPS, 60% break, 40% make) Ringer Equivalence: 0.4 B Reporting Formats: 4 x 2, 40 PPS, or Ademco Contact ID Telephone Numbers: Primary, secondary, and supervisory Reports: Full zone reports, console reports, general system reports, forced arming, and duress PAC PHYSICAL CONSOLE Dimensions: 10.5 in H x 7.75 in W x 2.87 in D (267 x 197 x 73 mm) Weight: 3 lbs. (1.36 kg) List Price: $348.00 Price: $252.00 Air Borne Germ Killer Details  Homes with Asthma patience or supressed immune systems from cancer treatments will benefit from cleaner air provided by the AIR BORNE GERM KILLER. Everybody knows sunglasses are sold based on the UV rating because UV rays are harmful. Well now the germs and viruses are going to know too! List Price: $399.00 Price: $269.00 Axis 210 IP Camera Details  640 x 480 resolution; 10/100 Ethernet or RS-232 serial modem interface (Z4-0197004 ) Price: $658.00 Axis 2400+ Video Server Details  Axis 2400+ Video Server, Video server for up to 4 cameras. Price: $979.00 CT/10K-3-D   Duct Units feature medical-grade closed cell foam to seal the probe insertion hole and to absorb vibration. Mounting tabs allow for easy installation directly to the wall of the duct. All Duct Units have etched Teflon leadwires and double encapsulated sensors to create a watertight package that can withstand high humidity and condensation and perform under real world conditions. Mounting Tabs for Easy Installation Probe Lengths: 4”, 8”, 12” and 18” Series 304 Stainless Steel Probes Double Encapsulated Sensors Medical-Grade Foam Padding Etched Teflon Leadwires Weatherproof or Weather Tight Enclosure (optional) Wide Selection of Temperature Sensing Elements Limited Lifetime Warranty Please review the manufactures on-line documentation for ordering guidelines. Duct Mount Options: Please Select...D-4" Insertion D-8" Insertion D-12" Insertion D-18" Insertion D-4-NB-5, 4" Insertion No Box w/5" plenum leads D-4-NB-10, 4" Insertion No Box w/10" plenum leads (+$2.50) D-4-NB-15, 4" Insertion No Box w/15" plenum leads (+$5.00) D-4-NB-18, 4" Insertion No Box w/18" plenum leads (+$7.50) Price: $25.00 CT/10K-3-R   Delta or BAPI-Stat II Style Enclosure Setpoint, Override or Bi-Metal Indicator (optional) Communication Jack (optional) Test and Balance Switch (optional) Wide Selection of Temperature Sensing Elements Limited Lifetime Warranty Setpoint The optional Setpoint is a linear slidepot adjustment that comes in various ranges, and is available as Reverse or Direct Acting. Legend An optional Setpoint Legend can be imprinted on the base of the enclosure. Common Legends include “Cool/Warm”, “65 to 80”(°F), “55 to 85”(°F), and “5 to 30”(°C). (See ordering grid.) Override The optional Override is a discreet momentary signal that can be configured to be compatible with any controller. Communication Jack Available with RJ11 (4 pin), RJ12 (6 pin), RJ45 (8 pin), or 3.5 mm phono plug style jack. Bi-Metal Indicator An optional Bi-Metal Indicator shows room temperature; accurate to ±1 °F. The display is protected by an acrylic plate and comes with a 50 to 90 °F or 10 to 30 °C legend. (Bi-Metal Indicator is not available on the BAPI-Stat II enclosure at present.) Test and Balance Switch A three-position slider can be provided on the back of the unit to change the sensor output as follows—the “Low” setting is “Full Cool”, “Normal” is the live sensor value, and “High” is “Full Heat” Please review the manufactures on-line documentation for ordering guidelines. Room Temp Options: Please Select...CT/10K-3-R Wall Mount CT/10K-3-R-BM5090 Bi Metal Wall Mount (+$18.00) CT/10K-3-RC35 Wall Mount Comm Jack 3.5mm (+$7.00) CT/10K-3-RC35-BM5090 Bi Metal Wall Mount w/3.5mm Comm Jack (+$25.00) CT/10K-3-RO Wall Mount Ovrd (-$2.00) CT/10K-3-RO-BM5090 Wall Mount w/Ovrd (+$23.00) CT/10K-3-ROC35 Wall Mount, Ovrd, 3.5mm Comm Jack (+$12.00) CT/10K-3-ROC35-BM5090 Bi Metal, Wall Mount, Ovrd, 3.5mm Comm Jack (+$30.00) CT/10K-3-RS Wall Mount Setpoint (+$6.00) CT/10K-3-RS-BM5090 Bi Metal, Wall Mount w/Setpoint (+$24.00) CT/10K-3-RSC35 Wall Mount, Setpoint, 3.5mm Comm Jack (+$13.00) CT/10K-3-RSC35-BM5090 Bi Metal, Wall Mount w/Setpoint and 3.5mm Comm Jack (+$31.00) CT/10K-3-RSO Wall Mount, Setpoint, Ovrd (+$11.00) CT/10K-3-RSO-BM5090 Bi Metal, Wall Mount w/Setpoint, and Ovrd (+$29.00) CT/10K-3-RUPSF-DF Wall Mount, Setpoint, Ovd, LCD Display , degree F (+$107.00) Price: $18.00 DCPA-1.2 Details  The Model DCPA-1.2 universal AC/DC Power Supply can deliver 30 VA of power. This compact, track-mounted supply accepts 120 VAC and delivers both 24 VAC and regulated 24 VDC power for control circuits. FEATURES 24 VAC and 24 VDC output from the same power supply LED indication of AC input and DC output status Overload protection Screw terminals with pressure plates Snap-track mounted Adjustable DC output List Price: $85.00 Price: $68.95 LM24-3-T US Details  LM (35 in-lb) Direct coupled non-spring return actuator, 35 in-lb minimum torque (4 Nm), approximately 8 sq. ft. Variable control input with MFT Electronic overload protection throughout rotation Visual position indicator Price: $130.00 « Previous | 1 | 2 | Next »